Send a command to LTE card to extract useful information, e.g. It is possible to send special 'info' command to LTE interface with /interface lte info command. It is possible to scan LTE interfaces with /interface lte scan command Username used if any of the authentication protocols are active If set to yes, uses DNS recieved from LTE interface Password used if any of the authentication protocols are active If set to auto, then will learn MAC from first packet Interface to passthrough IP configuration (activates passthrough) Interface on which to advertise IPv6 prefix Ip-type ( ipv4 | ipv4-ipv6 | ipv6 Default: ) LTE route by default is with distance 2 to prefer wired routes over LTE

Sets distance value applied to auto created default route, if add-default-route is also selected. Whether to add default route to forward all traffic over the LTE interface.Īuthentication ( pap | chap | none Default: none)Īllowed protocol to use for authenticationĭefault-route-distance ( integer Default: 2) PLMN codesĪll network related settings are moved under profiles, starting from RouterOS 6.41 Used to lock device to specific operator full PLMN number is used for lock consisting from MCC+MNC. Select/force mode for LTE interface to operate with Network-mode ( 3g | gsm | lte Default: 3g,gsm,lte) Max packet size that LTE interface will be able to send without packet fragmentation. Modem init string (AT command that will be executed at modem startup) Media Access Control number of an interface. Which APN profile to use for this interfaceįrequency band used in communication LTE Bands and bandwidths Some modems, that do not fully support this feature, will connect to the network but will not establish an IP data connection with allow-roaming set to no. Sub-menu: /interface lte Properties PropertyĮnable data roaming for connecting to other countries data-providers.

Warning: In RouterOS v7 ignore-direct-modem parameter is moved under /system routerboard modem menu

Mikrotik routerboard upgrade firmware